How to Connect a Logitech Wireless Mouse-A complete Step-by-Step Guide for all pc

Logitech wireless mice are popular for their convenience and versatility. These mice offer the freedom of wireless connectivity, allowing you to navigate your computer without the constraints of cables.

If you’ve recently purchased a Logitech wireless mouse and need assistance in connecting it to your device, you’re in the right place.

In this article, we will guide you through the process of connecting your Logitech wireless mouse step by step.

How to Connect a Logitech Wireless Mouse to Windows

How to Connect a Logitech Wireless Mouse-A complete  Step-by-Step Guide for all pc

  • While both wireless and Bluetooth mice can connect to a PC without cables, they have their own ways of establishing a connection between the two devices.
  • The former uses a receiver, while the latter utilizes Bluetooth to connect to the PC through an antenna.
  • You may also like to read: Raven Gadgets.

How to Connect Logitech Wireless Mouse to Windows Using Bluetooth

How to Connect a Logitech Wireless Mouse-A complete  Step-by-Step Guide for all pc
  1. To locate the Logitech mouse switch in the lower part of the device and turn it on.
  2. Keep the pairing button pressed. It is found on the left side and bottom of the mouse. After the pairing mode is active, a light will start flashing.
  3. Click on “Settings” in the Windows Start menu and select “Devices”.
  4. Press “Bluetooth & other devices,” then press the + icon next to “Add Bluetooth or other device.”
  5. Click on the information of the Logitech mouse on the screen to connect it to your PC.

How to Connect a Logitech Wireless Mouse to Windows Using Receiver

  This is how you pair your Logitech mouse with a unifying receiver:

  1. Plug your Unified Receiver into the USB connection on your computer and then press ‘Next’.
    Once it is confirmed that the displayed mouse information on the screen is accurate, press ‘Next’ again.
  2. Turn off the switch located beneath the device and then turn it on again to restart the mouse. It should now automatically connect with the receiver.
  3. Check to see if the cursor is appearing on your screen. If it is not visible, move the cursor back and forth.
  4. A pop-up message will ask you to confirm that the cursor is moving. Tap ‘Yes’ to accept it and then click ‘Next’.
  5. To complete the setup, click on ‘Finish’ below the screen.

How to Connect a Logitech Wireless Mouse to a MacBook

The Logitech wireless mouse shares a sleek design similar to the Apple Magic Mouse 2. Additionally, the Logitech wireless mouse comes in various unique design options.

So, you have several design options to choose a mouse for your Mac.

You may also like to read : Top 3 Gaming Laptop

How to connect Logitech Bluetooth mouse- Simple steps

  1. To power on the mouse, use the dedicated power switch located underneath it.
  2. Press the connection channel button, which will blink to indicate the mouse is ready for connection.
  3. To connect your Logitech Bluetooth mouse to your Mac, use the Logitech Bluetooth Smart™ software.
  4. Once successfully connected, the blinking light will stop, and a steady LED will remain lit.
  5. Your mouse is now successfully connected to your Mac via Bluetooth.
  6. You can also install the mouse installation software on your Mac for additional customization. The Logitech Options software package includes it.
  7. Launch the software and follow the instructions for configuring your wireless Logitech mouse

How to Fix Connectivity Issues with the Logitech Wireless Mouse

 Troubleshooting Tips
  • If you encounter any issues during the connection process, here are a few troubleshooting tips:
  1. Make sure the batteries are correctly installed and have enough charge.
  2. Try connecting the USB receiver to a different USB port.
  3. Restart your computer and try the pairing process again.
  4. Ensure that there are no other wireless devices interfering with the connection.
  5. If all else fails, consult the user manual or visit the Logitech support website for further assistance.


Connecting a Logitech wireless mouse to your computer is a straightforward process that can enhance your productivity and convenience.

By following the steps outlined in this article, you should be able to connect your Logitech wireless mouse without any issues.

Enjoy the freedom and flexibility of wireless navigation as you work, browse, or play.

1.How To Connect A Logitech Wireless Mouse To A Mac?

1.Turn on the mouse using the dedicated power switch underneath it.
2.Press the connection channel button on the mouse to initiate the pairing process.
3.Use the Logitech Bluetooth Smart™ software to connect the mouse to your Mac.
4.Once the pairing is successful, the blinking light on the mouse will stop, and a steady LED will remain lit.
5.Your Logitech wireless mouse is now successfully connected to your Mac via Bluetooth.

2.Why is my Logitech wireless mouse not connecting?

Before reinserting the dongle into the PC’s USB port, turn on the mouse. To check if the computer recognizes the device, move the mouse on the mousepad

3. how to connect logitech wireless mouse?

To connect a Logitech wireless mouse, first, install the batteries in the mouse and plug the USB receiver into an available USB port on your computer. Then, turn on the mouse and press the “Connect” buttons on both the USB receiver and the mouse to pair them. Once the pairing process is complete, your Logitech wireless mouse should be ready to use. Enjoy the freedom of wireless navigation on your computer!

Leave a Comment